Model X Splash guards red with protective film

Our mud flaps protect your Model X from road salt, asphalt cracks, and other dirt thrown up by the wheels. The mud flaps blend in well with the rest of the car and look like they come straight from the factory. A popular and sought after accessory for your Tesla!

One set includes:

4 mudguards (2 front right/left & 2 rear right/left).

The mudguards are made of soft quality ABS plastic in a red look that matches well with red Teslas.

Protective film to place under the mudguards to protect the paint on the car.

Clips and screws for mounting.

Assembly

The installation usually takes about 10 minutes for each mudguard for someone who has never worked with cars before.

Protective film (not necessary on Model X)
When you install the protective film, the paint around the wheel arches must of course be clean!

Identify how much protective film you need.The length of the protective film is sufficient to mount on all four mudguards.

We usually recommend the following, cut the protective film into four equal parts. Each part can then be divided widthwise, this means that the set of protective film included is enough for the entire first year. We recommend that you change the protective film 1-2 times a year if you are very careful about the paint under the mudguards, preferably every time you change the tire. You can find more protective film HERE.

Hold the mudguards up to the car to identify how far into the paint the edge of the mudguard goes. Here, the ambition is to be as close to this edge as possible with the protective film as it is precisely the edge of the mudguards that you want to cover with the protective film.

The protective film has a thin plastic film on both sides of the film. First peel off the plastic film covering the adhesive side. Install the film in the desired location and then peel off the plastic that protects the surface of the protective film.

Front splash guards:

Start by removing the clips on the inside of the wheel arch, hold the mudguards up against the car and the wheel arch. Push in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic in the wheel arch.
Turning the steering wheel in the same direction as the side you are going to mount the mudguards makes installation easier.

If you do not want to screw on the mudguards, you can press on the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

Back splash guard

For the rear mudguards, the process is the same, remove the clips, hold the mudguards up against the car and the wheel arch. Press in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic of the wheel arch.

If you do not want to screw the mudguards, you can press the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

If you want help with the installation, you must select the installation with the product above and the place of installation.

We will contact you to book a time for installation, allow about 1-2 weeks for the booked time.

Assembly time approx: 40 minutes.