NaN -Infinity

Mudguard Matte Black Heavy Duty Model ink Protective Film Tesla model S

Name: Mudguard Matte Black Heavy Duty Model ink Protective Film Tesla model S
Brand: Hamphi
SKU: 10526
Price: 795.00 SEK
Availability: OutOfStock

795 SEK

Sale Sold out

Taxes included.

Article Number: 10526

HAMPHI

Made to order, usually a delivery time of 1-3 weeks, contact us at info@hamphi.com for an updated delivery time

Quantity

Notify me

Free shipping over 100 USD within the EU*

View full details

Description

Our mud flaps protect your Model S from road salt, asphalt cracks, and other dirt thrown up by the wheels. The mud flaps blend in well with the rest of the car and look like they come straight from the factory. A popular and sought after accessory for your Tesla!

The matte black Model S mud flaps in a more powerful model are better suited for those locations with really tough winters.

One set includes:

4 mudguards (2 front right/left & 2 rear right/left).

The mudguards are made of soft quality ABS plastic in a matte black look.

Protective film to place under the mudguards to protect the paint of the car.

Clips and screws for mounting.

Assembly

The installation usually takes about 10 minutes for each mudguard for someone who has never worked with cars before.

Protective film
When you install the protective film, the paint around the wheel arches must of course be clean!

Identify how much protective film you need.The length of the protective film is sufficient to mount on all four mudguards.

We usually recommend the following, cut the protective film into four equal parts. Each part can then be divided widthwise, this means that the set of protective film included is enough for the entire first year. We recommend that you change the protective film 1-2 times a year if you are very careful about the paint under the mudguards, preferably every time you change the tire. You can find more protective film HERE.

Hold the mudguards up to the car to identify how far into the paint the edge of the mudguard goes. Here, the ambition is to be as close to this edge as possible with the protective film as it is precisely the edge of the mudguards that you want to cover with the protective film.

The protective film has a thin plastic film on both sides of the film. First peel off the plastic film covering the adhesive side. Install the film in the desired location and then peel off the plastic that protects the surface of the protective film.

Front splash guards:

Start by removing the two clips on the inside of the wheel arch, holding the mudguards up against the car and the wheel arch. Push in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic in the wheel arch.
Turning the steering wheel in the same direction as the side you are going to mount the mudguards makes installation easier.

If you do not want to screw on the mudguards, you can press on the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

Behind the front wheel arches there is a hole where the mudguard is mounted in.

Rear mudguard

For the rear mudguards, in addition to the clips inside the wheel arch, there is also a 10 mm screw at the bottom behind the wheel arch, which must be removed during installation. When the clips in the wheel arch and the screw at the bottom are removed, it is time to mount the mudguard.
Hold the mudguards up against the car and the wheel arch, press in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic in the wheel arch. At the same time as you also screw back the nut under and behind the wheel housing, this locks the mudguard in place.

If you do not want to screw the mudguards, you can press the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

If you want help with the installation, you must select the installation with the product above and the location for installation.

We will contact you to book a time for installation, allow about 1-2 weeks for the booked time.

Assembly time approx: 40 minutes.

Delivery

Items in stock are usually shipped within 1-2 working days. You can always see the current stock balance live on the website.

Orders received before 1pm are usually shipped the same day from our warehouse. Orders completed after this time or on weekends are processed the next working day. Please note that delivery time may vary depending on the choice of shipping method, as well as the recipient country, with a general delivery time of 1-3 working days for all stocked items. We cannot guarantee delivery time within 3 days during peak periods or unexpected delays by the shipping company.