Model S Splashback - Matte black with protective film

Our mudguards protect your Model S from road salt, asphalt cracks and other dirt thrown up by the wheels. The mudguards blend well with the rest of the car and look like they come straight from the factory. A popular and sought-after accessory for your Tesla!

One set includes:

4 mudguards (2 front right/left & 2 rear right/left).

The mudguards are in soft quality ABS plastic in a matte black look.

Protective film to place under the mudguards to protect the paint on the car.

The protective film has a thin plastic film on both sides of the film.

First peel off the plastic film covering the adhesive side.

Install the film in the desired location and then peel off the plastic that protects the surface of the protective film.

Plastic mounting plug and screws for those who wish.

We recommend that you change the protective film 1-2 times a year if you are very careful about the paint under the mudguards.
Preferably every time you change your tires! You can find more protective film HERE.

The mudguards do not need to be screwed in place, the rear ones are very good with only plugs and can be mounted without removing the tires, although it is easier without tires. The front mudguards sit okay without being screwed on and only using plugs. If you choose to screw them on, they will sit rock hard in place, by turning the steering wheel in the same direction as the side you are going to mount the splash guards facilitates the mounting.

The clips that sit in the wheelhouse are easy to remove (to be replaced with the new ones included here). The clips that sit in the plate under the car can be a little more difficult, if it breaks, use the clips you took out of the wheelhouse.