Innehåll som kan döljas
Description
Do you also experience annoying road noise and wind noise in your Tesla at higher speeds? Then you are not alone!
In recent years, we have worked actively to develop various solutions to reduce the noise level in the cars. Everything from door strips to special rubber mats in foam-like materials, but nothing is as effective as this solution where we disassemble the parts of the car and insulate where the problem occurs.
We now have the opportunity to offer you market-leading sound insulation of the same material that you find in, among other things, the Swedish sports car manufacturer Koenigsegg's cars!
Of course, we send you our own instructions. But keep in mind that, regardless of the model year of the car and regardless of which factory the car is manufactured in, there are large variations between two seemingly similar cars. The instructions are general as all cars are different and specific instructions may not apply to your particular car. The instructions are an extension of what each part of the package should be placed and assembled. But theinstructions do not focus on which screw to unscrew to access the inside of the door, for example. If you do not feel comfortable with screwing and dismantling the car in parts for your own installation, we always recommend that you book assembly directly on the website here.
The sound insulation is offered in several package levels, depending on which car and model year you have, the cars are differently insulated from the factory. Our recommendation is the whole car+ package
The more soundproofing you use in your car, the better the end result will be.
We recommend that you also supplement with our mounting tool to make it easier to squeeze out the air and get the glue to adhere properly (nothing mandatory but something that clearly facilitates the installation).
The more careful you are in this process, the better soundproofed it will be.
The assembly tool can be found here
The soundproofing has a strong glue on the back, does not require any primer or similar! However, it is important that the surface is clean. We usually recommend cleaning with T-red in a spray bottle and a cloth where you wipe the surface. Just as with assembly above, this step is very important! The cleaner, the better the glue will adhere and the better the result will be.
Package 1 - Wheelhouse (6 sheets)
Our most popular solution, soundproofing for all wheelhouses, here it is important to focus on the damping of the "moving sheet". Which means the sheet metal that sounds hollow if you knock on it.
Of course, it doesn't hurt to soundproof the other parts of the wheel arch as well, but the focus should be on the sheet metal that makes more noise when you tap it compared to the sturdy construction further inside the wheel arch (e.g. crash beams, etc.).
Assembly: Remove the tires + plastic and fabric in the wheelhouse.
Time required: About 4 hours
Package 2 - Doors (6 + 4 sheets)
The doors are a solution where we remove the panels on the inside of the door, secure the mounting points on the panel and the door to be able to easily reassemble everything when we are done (important).
Here we insulate in several layers, the first part on the inside of the plate towards the street 1/2 sheet on each door. The second part between the plate and the plastic on the car (1 sheet on each door) and the last part around and behind the speakers to insulate them 1/2 sheet on each door.
Do you have soundproofing left and you feel satisfied with the insulation on the doors? Great, then we would recommend using it on any other part of the car!
NOTE be careful with clips and especially cables when removing the inner door panel!
If you need extra clips, it is available HERE, you can also buy a complete kit with toolbox and clips HERE.
Installation: Install the panel in the door
Time required: About 4 hours
Package 3 - Baggage (5 sheets)
For those who experience a lot of noise from luggage and at the same time would like to seal the ceiling panels with extra sound insulation, this is the perfect solution for you! Here we usually recommend 2 sheets for the roof's respective panels, then we have a full 4 sheets for the luggage, which in many cases is enough and remains for other parts of the car!
Assembly: Mount the roof panels + the fabric and plastic parts in the luggage
Time required: About 4 hours
Package 4 - Entire car (12 + 8 + 6 sheets)
A complete soundproofing solution for the whole car + an extra sheet for those who want a little more material to work with during installation.
Time required: About 12 hours
Package 5 - Whole car + (12 + 8 + 6 sheets + other soundproofing)
Maximum soundproofing!
With 15 sheets of soundproofing + our other soundproofing for each car, this solution is hard to beat! The perfect way to get a car as quiet as possible.
Soundproofing included for each car:
Model S: Door moldings, headliner.
Model 3: Door moldings, headliner.
Model X: Door moldings, headliner.
Model Y: Door moldings, headliner.
Time needed: About 15 hours
How much noise reduction can I expect?
The car will not be silent, we can promise you that!
But with a complete package + our other soundproofing, you can expect somewhere between 3-6 dB depending on how careful you have been during installation with cleaning and squeezing out air between the sheet metal and the soundproofing. Expect variation depending on the rims and tires you use. The more thorough and the more air you squeeze out between the sheets and the plate, the better results you will achieve.