Pureest S1 Shampoo SIO2 500ml

Pureest S1 is a product that deserves its own category. It is the most revolutionary and popular product from the Pureest range. A shampoo that not only has a great cleaning effect, but also leaves a really good drainage and an incredible shine. strong cleaning effect but also leaves a really good drainage and an incredible shine in the paint. The shampoo works perfectly for cars both with and without paint protection. The product leaves a film that lasts about 2 to 4 weeks, which makes the vehicle easier to maintain during the time after the car wash.

NOTE. Wash one panel at a time and rinse off. Never wash in direct sunlight or on a hot surface. Very important as the product must not dry out.

Washingmethod:
Pureest recommends for best results two different washing methods.
1. Take 3 to 5 pump pressures of the nozzle that comes with a wash bucket, or about 10-12ml.
2. Take 1 pump with the nozzle provided directly into a wet wash glove/sponge. Go directly on the paint. Then rinse off immediately. Repeat the process for the rest of the vehicle. For example, take the bonnet and a fender separately and rinse, side doors separately and rinse, etc. Divide the vehicle into parts so as not to allow the product to dry in. Should the product dry in, the stains are most easily polished away.
Keep in mind that the shampoo does not foam, nothing wrong but it should be so.

Also suitable for vehicles with ceramic paint protection, and can of course also be used on the boat, robot lawnmower or truck.

The product provides very low friction against the paint, which is important as it is precisely friction that creates scratches! As always when washing a paint, there should be plenty of water in the microfiber glove.
For the least possible risk of scratches, we always recommend that our washable microfiber glove is used instead of traditional sponges.

And remember, as always, we recommend using gloves for all contact with chemicals, and avoid using the product in strong sunlight. SiO2 can make the paint static.

Color: White
Scent: Pureest's own scent
Nozzle: Trigger (included)
Dilution: This product can be diluted with water
Remember not to store the product in areas where it gets below freezing.
Other: None of our products contain PFAS (highly fluorinated substances).

"I think you get the best effect if you apply the product directly to a wet sponge/microfiber glove. For example, dip the washing glove in water and then apply the shampoo in the sponge/glove to directly take a panel on the vehicle. Then rinse the panel and repeat the same process on the whole vehicle."

"I always use the pressure washer as a pre-wash to rinse off degreaser and get the paint as clean as possible, but I always use a regular water hose to rinse the car after shampooing. Unpressurized water is better at finding its way through all the little drainage holes in the car and taking any shampoo residue with it." -Alex at Pureest