Remove and install aero cover pages

If Model 3 is equipped with aero cover pages, you must remove them to access the wheel nuts.

To remove an aero cover side:

1. Grasp the aero cover side firmly with both hands.
2. Pull the aero cover side towards you to release the fastening clips.

Install an aero cover side:

1. Align the aero cover side with the valve stem.
2. Press firmly in the center of the cover side to secure it and work your way outward, pressing firmly at the far end of each spoke. You may need to hold the opposite side of the cover page until each spoke is firmly attached.
3. Press firmly in the center of the cover page (do not hit the cover page with your hands) to make sure it is attached.
4. Finally, quickly pull each spoke to confirm that they are attached.

On Gemini wheels, press the outer edge of the cover until it is aligned with the wheel surface. Press the Tesla-T in the center until the capsule snaps into place. See for more information.

Caution: Before driving, make sure the aero cover is firmly attached so that it does not fall off.