Tesla Model Y Spoiler / Wing carbon fiber matte

Tesla Model Y spoiler made of real carbon fiber, matte surface.

Mount on a clean car, before mounting the surface should be wiped off. Then place the wing in the middle of the furthest edge of the trunk lid, the wing should "hug" the edge then it is placed correctly.

On the trunk lid you then mark the middle, as well as each edge where the wing ends (suggestedly with masking tape) and also the middle of the wing. Remove the protective film from the mounting tape and place it in place.

Do not press the wing firmly, but start by checking that it is within the markings. If the wing is slightly crooked, it can be corrected as long as you have not pressed the wing firmly.

If you think the placement is good, just start pressing, starting on both outer edges and working inwards towards the centre. Press for 3-4 minutes in total over the entire wing to ensure a successful installation. Please note that the installation should be carried out on a warm car where the surface is at least 15 degrees.

Suitable for:

• Tesla Model Y 2021-2024
• Tesla Model Y Standard 2025+