Innehåll som kan döljas
Description
The Keyless Blocker is a patented electronic control unit that allows the car key to be activated/deactivated on command. Thereby, the car key is protected against a relay attack but retains the convenience of keyless entry. The package includes a thinner battery and an instruction manual.
NOTE. The spare key must either be deactivated or protected with an additional Keyless Blocker to minimize the risk of theft!
Design |
Double-tap: Keyless entry is activated with two taps. No-tap: Keyless entry is activated by movement. |
---|---|
Size guide |
Check the size of your button cell battery. |
Certification |
Keyless Blocker® is a certified protection against a relay attack (Kiwa SCM). |
Keyless Blocker® installation guide
NOTE. Pay attention to which negative/positive pole is facing down in the car key.
Step 1. Open the car key to remove the coin cell battery.
Step 2. Then wrap the chip around the battery (use the copper tape).
Step 2.5. If necessary, place the foam rubber in the center of the circuit board next to the components (see accompanying instruction manual).
Step 3. Then place the battery with the assembled chip inside the car key.
Step 4. You can now verify that the installation was done correctly by testing the selected programmed user mode on your vehicle.
Installation movie
Innehåll som kan döljas
Passar till
Tesla Model X (2021+)
Tesla Model X (2017-2020)
Tesla Model 3 (2017-2020)
Tesla Model 3 (2021-2023)
Tesla Model S (2012-2016)
Tesla Model S (2017-2020)
Tesla Model S (2021+)
Mustang Mach-E
Hyundai Ioniq 5
Hyundai Kona Electric
Honda E
Kia EV6
Kia Niro EV
Mercedes-Benz EQA
Mercedes-Benz EQB
Mercedes-Benz EQC
Mercedes-Benz EQE
Mercedes-Benz EQS
MG 4 Electric
MG 5 Electric
MG ZS EV
MG Marvel R
Polestar 2
Porsche Taycan
Porsche Taycan Cross Turismo
Tesla Model Y Juniper
Volkswagen ID.Buzz
Volkswagen ID.3
Volkswagen ID.4
Volkswagen ID.5
Volvo C40 Recharge
Volvo EX30
Volvo XC40 Recharge
Audi Q4 e-tron
BMW i3
BMW i4
BMW i7
BMW iX1
BMW iX3
BMW iX