Soundproofing - Steps & Levels

Soundproofing, different stages & levels and what difference it makes

Do you also experience annoying road noise and wind noise in your Tesla at higher speeds? Then you are not alone! In recent years, we have worked actively to develop various solutions to reduce the noise level in the cars. Everything from door moldings to special rubber mats in foam-like material, but nothing is as effective as this solution where we take apart the parts of the car and isolate where the problem occurs on your unique car.

We now have the opportunity to offer you market-leading sound insulation of the same material that you will find in, among other things, the Swedish sports car manufacturer Koenigsegg's cars!
Of course, we send you our own instructions.

But keep in mind that regardless of the year model of the car and regardless of the factory in which the car is manufactured, there are large variations between two seemingly equivalent cars. The instructions are general as all cars are different and specific instructions may not apply to your particular car. The instructions are an extension of what each part in the package should be placed and assembled. However, the instructions do not focus on which screw to unscrew to access the inside of the door, for example. If you do not feel comfortable with screwing and dismantling the car into parts for your own installation, we always recommend that you book assembly directly on the website here.

Soundproofing is offered in several package levels, depending on the car and year model you have, the cars are insulated differently from the factory. Our recommendation is the whole car package. The more soundproofing you use in the car, the better the end result will be.

We recommend that you also supplement with our assembly tool to make it easier to squeeze out the air and get the glue to adhere properly (not mandatory but something that clearly facilitates the assembly). The more careful you are in this process, the better soundproofed it will be.

The soundproofing has a strong adhesive on the back, requires no primer or similar! However, it is important that the surface is clean. We usually recommend cleaning with T-red in a spray bottle and a cloth where you wipe the surface. As with assembly above, this step is very important! The cleaner it is, the better the glue will stick and the better the result will be.