Rear splitter alfa romeo Brera (without vertical bars)

Rear splits (without vertical closes) - Alfa Romeo Brera

Fits: Alfa Romeo Brera 2005-2010

Type of Body:THEN

VERSION:Prelift

Maxton Design is one of the most well -known manufacturers of first -class visual trim parts in the world. We provide a varied range of components for Italian vehicles. Among many other parts you can find this rear splits without diffuser. This modern and robust element was made of ABS, which is currently among the most widely used materials in the manufacture of vehicle equipment elements.

Why is this Alfa Romeo Brera rear splitter without diffuser worth the attention?

- have a nice design
- Improves the car's aerodynamics
- Will be ready to be mounted
- Improves the image of the car

Rear splits without diffuser for Alfa Romeo Brera is easy and quick to install, which refreshes the look of your car in an instant. It is a very compatible reversible visual setting component dedicated to this Italian model. Thanks to this splits, the pressure on the rear axle increases, which improves the grip and stability - the effect is especially noticeable during high -speed driving. It is a remarkable addition to front splitters, side skirts and rear side splitters.

The part is ready for assembly, but can easily be painted if there is a need to match it according to your taste. All Maxton Design components for reversible optical tuning are high quality products that will satisfy all fans of fast racing cars.

By purchasing this product you accept the Terms of Service.

SET
After the final treatment of the product, a decal is attached with the Tüv certificate number and a suitable kit is selected. The finished set is protected in foil with our company logo and then packed in a shipping carton. In our offer, we also have self -adhesive decorative lists to further strengthen the diffuser's appearance. These stickers are rolled together into a roll and are designed for self -assembly. They can be ordered with the diffuser by choosing the appropriate variant available on the product. When installing the diffuser in the car you may need to use a glue. In this case, we recommend that you use polyurethane -based glue (self -adhesive). Both mounting of the stickers and mounting of the image number itself should be preceded by proper preparation of the product's surface and the car's body.
INSTALLATION
The installation should start by trying the products for the car. The installation requires 4 to 10 holes with a diameter of 6mm in the underside of the rear bumper (the holes should be distributed evenly) before installation, remove the protective foil from the diffuser. The installation requires proper preparation of the product's surface and the car's body. When using glue (we recommend using polyurethane -based glue) or tape (we recommend using 3M acrylic double -sided tape) as extra glue between the elements, the glue surface must first slow down and degreased with an aggressive solvent. After applying the glue, the binding period is 24h - the car should not be used at this time.
The installation of the diffuser must follow the instructions in the manual that comes with the kit that is delivered or can be downloaded on our website.