Model X splash guard matt black with protective film

Our mud flaps will protect your Model X from road salt, asphalt cracks and other dirt thrown up by the wheels. The mud flaps are made of soft quality ABS plastic in a matte black look and blend well with the rest of the car and look like they come directly from the factory. A popular and sought after accessory for your Tesla!

Includes:

4 mudguards (Right front, left front, right rear and left rear), protective film and clips and screws for mounting.

Installation:

Installation usually takes about 10 minutes for each fender for someone who has never worked on cars before.

Protective film (not necessary on Model X)

When you install the protective film, the paint around the wheel arches must of course be clean!

Identify how much protective film you need. The length of the protective film is enough to fit all four mudguards.

We usually recommend the following, cut the protective film into four equal parts. Each part can then be divided widthwise, this means that the set of protective film included is enough for the entire first year. We recommend that you change the protective film 1-2 times a year if you are very careful about the paint under the mudguards. Preferably every time you change your tires. You can find more protective film HERE.

Hold the mudguards up against the car to identify how far into the paint the edge of the mudguard goes. Here, the ambition is to be as close to this edge as possible with the protective film as it is precisely the edge of the mudguards that you want to cover with the protective film.

The protective film has a thin plastic film on both sides of the film. First peel off the plastic film covering the self-adhesive side. Install the film in the desired location and then peel off the plastic protecting the surface of the protective film.

Front mudguards:

Start by removing the clips on the inside of the wheel arch, holding the mud flaps up against the car and the wheel arch. Push in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic in the wheel arch. By turning the knob in the same direction as the side you are going to mount the mudguards, the installation is easier.

If you do not want to screw on the mudguards, you can press the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

Rear mudguard

For the rear mudguards, the process looks the same, remove the clips, hold the mudguards up against the car and the wheel arch. Press in the new clips that come in the package. At the top of each mudguard there are two holes where you can screw the mudguard to the plastic in the wheel arch.

If you do not want to screw the mudguards, you can press the top with the supplied metal clips. Hold the mudguard up against the edge of the wheel arch, press the clips together to make it a little tighter and then press the clips against the car and the mudguard. Perfect for those who do not want to drill!

Suitable for:

• Tesla Model X 2017-2020