Remove and install wheel nut covers

If Model X is equipped with wheel nut covers, you must remove them to access the wheel nuts.

To remove a wheel nut cover:

• Insert the rounded portion of the lug nut cover tool, if applicable (found in the glove box of some vehicles or you can use a small Allen wrench), into the hole below the Tesla T.

Anm: The wheel nut cover tool can also be purchased at an auto parts store or ordered online.

• Maneuver the tool so that it is fully inserted into the hole in the wheel nut cover.
• Turn the tool so that the rounded part touches the center of the wheel nut cover.
• Pull the tool firmly away from the wheel until the wheel nut cover comes off.

Install the wheel nut cover:

• Align the wheel nut cover in place.
• Press the wheel nut cover firmly until it snaps into place.

Caution: Before driving, make sure the wheel nut cover is securely fastened to prevent it from falling off.