Payment with Klarna Payment with Paypal Payment with Swish
Snabb leverans / Faktura

Mountain Pass Performance - Model 3 sports coilovers AWD/Performance

  • 34 995 SEK

Dela
Artikelnummer: 1418
Leverantör: Mountain Pass Performance

Beställningsvara. Kontakta oss för en uppdaterad leveranstid.

I priset för montering så ingår även en hjulinställning (värd 1 995:-).


Mountain Pass Performance Model 3 komfort justerbara coilovers för performance eller AWD modellerna. Speciellt utvecklade för att förbättra upplevelsen och köregenskaperna i din Model 3 på ett komfortabelt men samtidigt justerbart sätt. Perfekt för dig som vill sänka bilen samtidig som komforten ökar, speciellt över stora gupp, men samtidigt ha möjlighet att köra på bana med bilen. Justerbar i höjdled från fabrikshöjd ner till 50 mm under standard.


Stötdämparna är progressiva som är inställda för att aktiveras i de mest aggressiva stötarna, men samtida inte för att öka hårdheten under normala förhållanden och körstil.


Mountain Pass Performance egna ord om deras justerbara komfort coilovers för Model 3:

Used during our record-breaking lap of Laguna Seca at Tesla Corsa 4! 


Aftermarket suspension is something that can make or break the enjoyment of a vehicle. Unfortunately for Model 3 owners, the car is very high from the factory and runs into the bump stops over just about any bump – and they are always engaged once a car has been lowered on springs. This means that the dampers (also called shock absorbers) must be changed when lowering the car to allow for compliant chassis over bumps, and to avoid damaging the vehicle when driving aggressively – as the bump rubber can only compress so much before effectively becoming a rock. Repeated extreme impacts can damage the top mounts and put unnecessary shock through the entire vehicle, and upset the platform when driving at the limit.

Our coilovers have been developed to offer a huge range of height adjustability with significantly more travel than stock. Our coilovers have been developed jointly with KW Suspension, one of the leading aftermarket performance and racing suspension suppliers in the world. There is a reason why KW is the go-to pick for those that own European sports and luxury cars.

RIDE HEIGHT RANGE: 

Factory Ground Clearance (19″ Wheels, Non-Performance): 

Front: 150mm
Rear: 145mm

* As Model 3 production evolves we have seen different cars be slightly different heights. You can measure the ground clearance of your car if you’re trying to determine exactly how much you’ll be able to lower your car with our coilovers, but as a guide you’ll be able to get the car far lower than you ever should want to run it. In our testing we found 110mm front and rear was a very driveable height and that will be our recommended ride height.

MPP Coilover Range: 

Front: 100mm – 140mm
Rear: 100mm – 140mm


We spent 10 days in California with a Model 3 testing and developing our dampers on some of the best roads in North America. We’ve driven over harsh roads, smooth roads, mountain roads and everything in between. The dampers have been tuned for the sporting canyon carver that doesn’t want to sacrifice ride quality in the quest for sports car handling. We developed our AWD coilovers both on the road and also on the racetrack – setting the fastest lap in class at Global Time Attack, a low 1:59 which was done on the same tire compound as stock!

This suspension kit is rebound and compression adjustable, and every click makes a distinct and significantly noticeable difference. Unlike some suspension on the market that advertise themselves as “adjustable” – our dampers are able to more than triple the rebound forces from full soft to full stiff in the low speed range (low speed means low damper shaft speed – everything other than large bumps in the road). See the graph below to understand the actual difference in adjustment range. For your reference, 20-50mm/sec is what you feel when turning the steering wheel – this represents chassis motion. 300mm/sec and up are fairly decent size bumps.

With the rebound and compression turned up, these dampers are suitable for the racetrack for HPDEs and lapping days, and when turned down they actually produce less forces than OE dampers. You’ll be amazed at the difference from full soft to full stiff.


Our suspension system utilizes the factory rear spring mounting location – as designed by Tesla. While it is likely that some other coilover manufacturers will take the easy path and put the spring on the rear damper, the upper parcel shelf was never designed to carry the entire vehicle load. The chassis rigidity simply isn’t there, not to mention the NVH concerns.

This suspension kit comes with a 2-year warranty (void with track-use, as is KW policy). Installation is very straight forward and the documentation and setup instructions can be found here. The OEM top-hats are to be re-used and as such so a spring compressor is required to disassemble the factory front dampers. Nothing on the car needs to be permanently modified or damaged for installation.

If you’re interested in also purchasing our suspension arms as a package with the coilovers, please message us for a discount code!

Installation instructions HERE